Hardwire Electronics PDM28 Power Distribution Module

$1,900.00 Each - Free Shipping

-

Hardwire Electronics PDM28 is an awesome Power Distribution Module we at HCR have been using in some of our wiring projects with great results.

  • 16 0-28v Protected Analog Inputs with 16 bit resolution, also usable as Digital Inputs including up to 300Hz Frequency Measurement
  • 28 Outputs consisting of 4 – 100A Peak, 30A Continuous, 6 – 80A Peak, 20A Continuous and 18 89A Peak, 20A Continuous for a combined 200A maximum current capability
  • All Outputs are capable of High/Low side (+/-) control
  • Each output is overcurrent, overtemperature, load dump and reverse polarity protected.
  • Outputs have PWM Capability up to 1000Hz max
  • Outputs can have timers
  • Support for Blink Marine, Grayhill, Motec, Haltech, and Marlin CAN keypads. Up to four keypads can be used at once.
  • Uses Windows 10 Software and USB connection (No Serial Coms)

Included

  • PDM28
  • 2x DTM Connectors + Contacts
  • 2x DT Connectors + Contacts
  • 1x DTP Connector + Contacts
  • 2x Radlok Connectors
  • USB Flash Drive with Pro PDM Configurator Software and Instruction preloaded
  • 2m USB Cable
  • Printed A4 instruction manual

PDM28 Instruction Manual [PDF Format 31 MB]

Please allow 1-2 weeks for shipping.

SKU: HE-PDM28 Category: Tag:

 

General

Size12.52″ x 4.88″ x 2.28″ (318 x 124 x 58 mm)
Weight 3.61 lb (1640 g)
Operating Temperature -67 to 194 °F [-55 – 90C ]
ConstructionMachined Aluminium Enclosure, Media Blasted and Anodised Black
IP RatingIP67 Water and Dust Ingress Protection
Connectors2x 12-Pin DTM, 2x 12-Pin DT, 1x 4-Pin DTP
Indicator LEDs50x RGB LEDs

Inputs

Type16 analogue inputs which can also serve as digital inputs.
Measurement RangeEach input can measure voltages between 0-28V, independent of the battery voltage.
Measurement resolution16-bit or 0.001V
Frequency MeasurementAutomatic frequency measurement up to 300Hz
ProtectionFully protected for input voltages between  -24V to 40V.
Pull Up/Down ResistorsEach input has a software selectable 10K Pull-up or Pull-down resistor
Added FeaturesConfigure as active high or low. Configurable Hysteresis voltage. Latching or momentary operation.

Outputs

Type4 high/low side outputs 100A peak, 30A continuous, with reverse current protection.
6 high/low side outputs 80A peak, 20A continuous, with reverse current protection.
18 high/low side outputs 80A peak, 20A continuous
Combined200A combined output maximum current
Output current control steps100mA
ProtectionEach output is overcurrent, overtemperature, load dump and reverse polarity protected.
Soft StartPWM soft start can be enabled on outputs to limit inrush current.
PWMEach output can be Pulse Width Modulated based on a user defined variable. This can limit the speed of radiator fans, fuel pumps, and dim lights.

1000Hz maximum PWM frequency

Added FeaturesOutputs can be configured to stay on for a specified time after the input is removed, useful for thermo-fans.
Outputs can be retried multiple times after an over-current event is detected.
CAN Bus
Interface3x CAN2.0A/B ports  (Bus 3 reserved for NIO Power Module Expansion)
Bus Speed50, 100, 125, 250, 500, 1000 kbps
Termination ResistorBoth CAN bus ports have software selectable CAN termination resistors.
Input Stream100x inputs, fully customizable variable parsing with bit masking, math functions, and compound CAN message filtering
Output Stream100x Outputs, Fully customizable CAN frame construction with math functions
CAN KeypadSupport for Blink Marine, Grayhill, Motec, Haltech and Marlin CAN keypads.
Up to four keypads can be used at once. 1x LIN Bus Port. Currently unsupported, enabled in a future software update
Logging
Storage128Mb of onboard flash storage for logging PDM data
Speed1Hz to 50Hz
ViewingData can be downloaded and graphed via the Hardwire Electronics PDM configurator software or exported as a .CSV file and graphed in external software
Functions
Output FunctionsEach Output can be switched with a user defined function.
Logical operatorsAND, OR, NOR, XOR, NAND, NOR, >, >=, <, <=, Equal, Not Equal.
Maths ChannelsFully customizable Maths Functions
Mathematical OperatorsMathematical Operators – Addition, Subtraction, Multiplication, Division, Modulus, Choose, Min, Max
Binary OperatorsBinary Operators – AND, OR, XOR, Left Shift, Right Shift
CountersConfigurable counters which increment, decrement, and reset based on user defined conditions

IMU

Rotation3-axis rotational position measurement 0.1° resolution
Gyroscope2000°/s 3-axis measurement
Accelerometer-8g to 8g 3-axis measurement
PCB temperature6-Zone PCB temperature measurement.
RTCReal Time Clock with battery backup for 30 days. Used to store the correct time and date for data logs.

USB

TypeUSB 2.0 compliant with Mini-B
DriverIntegrated driver with Windows 10
PC App
NameHardwire Electronics PDM configurator software.
CompatibilityWindows 10 machines
ConnectivityEasy connection to the PDM with USB and Windows integrated drivers. No unreliable USB-serial converter needed.
KeypadsSupported keypads

  • Blink Marine CAN Open – 4 to 15 Button
  • Blink Marine Race Pad.
  • Grayhill/Motec CAN Open 4-20 Button.
  • Marlin J1939 8 Button.

Video

Reviews

There are no reviews yet.

Be the first to review “Hardwire Electronics PDM28 Power Distribution Module”